Flat roof skylights
Flat roof skylights are always mounted as an integrated system. Again, in the dimensions of 400/600/800 mm.
The basic construction element is AQUATHERM-WALL, a thermal insulating element, which is at the level of thermal insulation. It is sealed into VAPOUR-PROOF FOIL I so it is always on the construction vapour-proof layer.
Subsequent composition of tube line is to the exterior as well as interior. Ending of the skylight in roof shell is always with a PMMA dome, thickness of 0.6 mm in the dimensions of 400/600 and thickness of 0.8 mm in the dimensions of ELS 800.
A construction element is system cuff of PVC sheet that has ideal contact parameters with final waterproofing of the building.
In green roofs, the entire exterior pipeline above the thermal insulating element is, depending on the backfill height, encapsulated in contact insulation and as a whole it passes through the backfill layers.
PMMA thickness 0.6 mm
ELS 800 thickness 0.8 mm
Plastic coated sheet metal
Reflective sheet metal 99.8%
Silver and silicon composition
Aquatherm – Wall
layered four-glass sealed into the ILLBRUCK 220 vapour-proof foil
insulator – ISOVER EPS 3000
laser fired KOMAXIT coating
This issue gets more and more attention over the years as the fire and safety requirements for buildings have been developing. Every year the number of installations with fire protection solution increases and the increase in industrial implementation is 80 % per year.
Our ELS FIRE SYSTEM has been modified to the EI 15 DP1, EI 30 DP1, EI 45 DP1 variants, in these variants it is always a system solution of fire protection with regard to CERTIFICATION and required DP1 parameters.
IMPLEMENTATION IS ALWAYS PROCESSED IN THE DESIGN DOCUMENTATION INDIVIDUALLY WITH REFERENCE TO THE FIRE SECTIONS.
Dimmer flap is required, especially in rooms where, despite high light gains, the space needs to be shaded – e.g. conference rooms, training centres, kindergartens during afternoon rest time but also children’s rooms. It is mounted as a system element either with a standards switch or stair circuit, or with a remote control when installed in a smart house with control.
In the SKYLIGHT variant with daylight it is a standard nowadays. We install powerful LED STRIPS with a maximum output of 14 W/bm into all types of skylights in the variant with given colour of luminous flux and output or remotely controlled with colour variability from 2 000 – 5 500 CAL and with the luminous flux intensity of 5 % – 100% of the output.
INSTALLATION IN THE ENTIRE RGB COLOUR SPECTRUM SEEMS TO BE INTERESTING.
BOTH ACCESSORIES (DIMMER FLAP AND LED LIGHTING) CAN BE INSTALLED IN THE SMART CONTROL MODE.
In skylights of larger diameter of 600/800 it can be ensured in two ways – either using a safety foil or installing a security grille. HOWEVER, IT IS INDIVIDUAL AND IT IS A PART OF WHOLE SAFETY SOLUTION WITH REGARD TO THE PURPOSE OF THE BUILDING, LEVEL OF PROTECTION AND OTHER CONTEXTS.